Effect of unpredictable timing on the hip, knee, and ankle kinematics and center of mass during deceleration tasks.

BACKGROUND: Unpredictable stopping or deceleration tasks are crucial to prevent ACL injury. The purpose of this study was to reveal differences and relationships in kinematics during different deceleration tasks with and without anticipation. METHODS: Twenty-four collegiate athletes were recruited. Three commercial video cameras were used to capture frontal and sagittal lower-extremity kinematics. Participants were instructed to perform three deceleration tasks: 1) anticipated stopping and running backward at a point indicated previously (SRB-P); 2) anticipated stopping and running backward in front of a badminton net (SRB-N); and 3) unanticipated stopping and running backward upon random flashing of a light (SRB-U). Differences and relationships between hip, knee, and ankle kinematics at stopping (SS) and deceleration steps (DS) and the height of the great trochanter (HGT) at SS were analyzed. RESULTS: For all tasks, the knee flexion angle was less than 25° at SS. There were no significant differences in hip, knee, and ankle kinematics between tasks. HGT during SRB-U was higher than that in the other tasks at DS. Hip flexion angle at SS and DS was significantly correlated with HGT at SS. During SRB_P and SRB_N, only knee flexion angle at DS was significantly correlated with HGT at SS. CONCLUSIONS: The deceleration task in this study, SRB, causes a low knee-flexion angle at SS. The COM remained higher during unanticipated stopping, which is related only to hip flexion angle during the task. Knee flexion movement does not contribute to lowering COM during an unpredictable deceleration task.

Observational study investigating the relationship between maxillomandibular characteristics and temporomandibular disc conditions in female patients with a skeletal class III pattern.

OBJECTIVES: The objective of this study was to analyze the relationship between maxillomandibular characteristics and the severity of temporomandibular disc displacement in female patients with a skeletal class III (SKIII) pattern. METHODS: Fifty-seven samples were included in the study. The evaluation of articular disc conditions was conducted using magnetic resonance imaging, while 25 cephalometric variables from lateral and postero-anterior (P-A) cephalograms were measured to determine their maxillomandibular characteristics. The samples were categorized into three groups based on the articular disc conditions: (1) normal disc position (NDP), (2) disc displacement with reduction (DDwR), and (3) disc displacement without reduction (DDwoR). The relationship between the maxillomandibular characteristics and disc conditions was examined through both basic statistical analysis and multivariate analysis using principal component analysis (PCA). RESULTS: The Kruskal-Wallis and Dunn-Bonferroni tests revealed a significant difference between the groups in terms of the deviation of mandibular characteristics observed on the P-A cephalogram. The DDwoR group exhibited significantly larger menton deviation, ramal height asymmetry index, and total mandibular length asymmetry index compared to the NDP and DDwR groups. Moreover, the PCA successfully extracted all cephalometric variables into eight principal components. Among them, only the principal component related to mandibular asymmetry was able to differentiate the SKIII samples with DDwoR from the other groups. CONCLUSIONS: The findings of this study highlight a significant relationship between mandibular asymmetry and the severity of disc displacement, particularly DDwoR, in female patients with a SKIII pattern.

Dynamic three-dimensional shoulder kinematics in patients with massive rotator cuff tears: a comparison of patients with and without subscapularis tears.

BACKGROUND: Massive rotator cuff tears (MRCTs) with subscapularis (SSC) tears cause severe shoulder dysfunction. In the present study, the influence of SSC tears on three-dimensional (3D) shoulder kinematics during scapular plane abduction in patients with MRCTs was examined. METHODS: This study included 15 patients who were divided into two groups: supraspinatus (SSP) and infraspinatus (ISP) tears with SSC tear (torn SSC group: 10 shoulders) or without SSC tear (intact SSC group: 5 shoulders). Single-plane fluoroscopic images during scapular plane elevation and computed tomography (CT)-derived 3D bone models were matched to the fluoroscopic images using two-dimensional (2D)/3D registration techniques. Changes in 3D kinematic results were compared. RESULTS: The humeral head center at the beginning of arm elevation was significantly higher in the torn SSC group than in the intact SSC group (1.8±3.4 mm vs. -1.1±1.6 mm, p<0.05). In the torn SSC group, the center of the humeral head migrated superiorly, then significantly downward at 60° arm elevation (p<0.05). In the intact SSC group, significant difference was not observed in the superior-inferior translation of the humeral head between the elevation angles. CONCLUSIONS: In cases of MRCTs with a torn SSC, the center of the humeral head showed a superior translation at the initial phase of scapular plane abduction followed by inferior translation. These findings indicate the SSC muscle plays an important role in determining the dynamic stability of the glenohumeral joint in a superior-inferior direction in patients with MRCTs.

Stomatognathic functional improvement in a patient with a canted occlusal plane and temporomandibular disorder treated with an edgewise appliance and miniscrews.

Generally, a canted occlusal plane results in esthetic problems, such as an asymmetric mandible with midline deviation, and functional problems, such as temporomandibular disorder (TMD). For many years, orthognathic surgery has been used to level a canted occlusal plane. However, similar effects might be achieved by intruding the posterior teeth using a miniscrew. This case report describes a patient with a canted occlusal plane, mandibular deviation, shifted dental midlines, and TMD treated with an edgewise appliance using miniscrews as anchorage. Vertical control of posterior teeth with miniscrews enabled flattening of the canted occlusal plane. Dental midlines were coincided with the midfacial line, thereby improving smile symmetry. During 4 years of retention, the patient maintained ideal occlusion. Furthermore, TMD symptoms disappeared, and significant improvements in stomatognathic functions were observed compared with those at pretreatment. These results suggest that miniscrews can be used to improve canted occlusal plane and stomatognathic malfunctions.

Mobile-bearing insert used with total knee arthroplasty does not rotate on the tibial tray during a squatting activity: a cross-sectional study.

BACKGROUND: Total knee arthroplasty (TKA) is commonly performed around the world. Implant designs include fixed-bearing and mobile-bearing. Mobile-bearing design was developed as a rotating platform that allows axial rotation of the insert around the longitudinal axis. This phenomenon may limit full exploitation of the characteristics of the mobile-bearing insert, which may cause wearing and reduce longevity. However, there is limited knowledge on rotational behavior of the polyethylene mobile-bearing insert under weight-bearing conditions. We aimed at determining the rotational motion of each component at full extension and flexed positions during a squatting activity after TKA. METHODS: This study was a cross-sectional study (level 4) involving patients with severe knee osteoarthritis scheduled to receive TKA. We examined 13 knees of 11 patients after mobile-bearing TKA (NexGen LPS-Flex, Zimmer Inc.) at 10 weeks and 1 year postoperatively. Four identical metallic beads were embedded into the insert. Wide-base squatting was chosen for analyses. Three-dimensional in vivo poses of the prostheses were created using a 3D-to-2D registration technique. During flexion, rotation of the femoral component relative to the insert (FEM/INS) and tibial component (FEM/TIB) as well as insert rotation relative to the tibial component (INS/TIB) were computed. Repeated measure 2-way ANOVA and post hoc test was used. RESULTS: In the fully extended position, FEM/INS was significantly smaller than INS/TIB both at 10 weeks (- 0.3° vs. 6.3°, p = .013) and 1 year (- 0.8° vs. 4.9°, p = .011), respectively. During the squatting activity, rotation motions of FEM/TIB, FEM/INS, INS/TIB were 5.7°, 5.9°, and 1.8° at 10 weeks and 6.3°, 5.5°, and 1.6° at 1 year, respectively. Rotation motion of FEM/INS was significantly greater than that of INS/TIB at both 10 weeks (p < .001) and 1 year (p < .001). CONCLUSIONS: The mobile-bearing insert enhances the compatibility of FEM/INS in extension; the amount of INS/TIB rotation is significantly smaller than that of FEM/INS during a squatting activity. This information will inform surgeons to take caution to perform TKA with a fixed insert in which 6.3° of rotational offset would be added to the rotational alignment at FEM/INS at full extension. TRIAL REGISTRATION: UMIN-CTR, UMIN000024196. Retrospectively registered on 9 September 2016.

Transcultural Reliability and Validity of the Japanese-Language Version of the Pelvic Girdle Questionnaire.

OBJECTIVE: The purpose of this study was to validate a Japanese version of the Pelvic Girdle Questionnaire (PGQ) and to confirm that the Japanese version of the PGQ (PGQ-J) was as valid as the original version. METHODS: This study involves 2 phases: (1) a cross-cultural adaptation study and (2) a cross-sectional study. The English PGQ was translated referring to the cross-cultural adaptation study process. Forty healthy pregnant or postpartum Japanese women participated. Women with pelvic girdle pain (PGP) completed the PGQ-J and 5 other instruments. Internal consistency, construct validity, test-retest reliability, ceiling and floor effects, and discrimination validity of the PGQ-J were analyzed. RESULTS: The PGQ-J showed high internal consistency with a Cronbach α of .968, and an interclass correlation coefficient of .79. The content validity showed a high positive correlation with the Oswestry Disability Index and Disability Rating Scale. CONCLUSION: The PGQ-J was reliable and valid with high internal consistency and content validity for assessing disability owing to PGP in Japanese pregnant and postpartum women. The PGQ-J is expected to facilitate research and clinical practice for PGP in Japan and contribute to the welfare of postpartum women.

High validity of measuring the width and volume of medial meniscal extrusion three-dimensionally using an MRI-derived tibial model.

BACKGROUND: Medial meniscal extrusion (MME) is an important marker of knee osteoarthritis (KOA) progression. The purposes of this study were: 1) to determine whether there are morphological differences between CT- and MRI-derived tibial plateau models; and 2) to determine whether measurement of MME volume and width using an MRI-derived tibial model is as accurate as measurements on a CT-derived tibial model. METHODS: This was a cross-sectional study that enrolled ten participants with medial KOA (Kellgren-Lawrence grade 1 to 3). Primary outcome was surface difference of the medial tibial plateau between CT- and MRI-derived models. Furthermore, volume and cross-sectional area of the medial tibial plateau were compared between CT- and MRI-derived models. Measurements of MME volume and width were compared between CT- and MRI-derived tibial models. RESULTS: Minimal and maximal surface differences of the medial tibial plateau between the CT- and MRI-derived models were - 0.15 [- 0.44, 0.14] mm (mean [95% confidence interval]) and 0.24 [- 0.09, 0.57] mm, respectively. There were no significant differences in volume and cross-sectional area of the medial tibial plateau between CT- and MRI-derived tibial models. The MME volumes measured on CT- and MRI-derived models were 942.6 [597.7, 1287.6] mm3 and 916.2 [557.9, 1274.6] mm3, respectively (p = 0.938). The MME widths measured on CT- and MRI-derived models were 4.2 [1.9, 6.5] mm and 4.5 [2.2, 6.9] mm, respectively (p = 0.967). CONCLUSIONS: CT- and MRI-derived models of the medial tibial plateau did not show significant morphological differences. Both CT- and MRI-derived tibia can be used as a reference to measure MME in early-to-moderate medial KOA.

Repeatability of quantification of extrusion of the medial meniscus in knee osteoarthritis using three-dimensional models.

Objective: Meniscal damage is one of risk factors for the development of knee osteoarthritis (KOA). Medial meniscal extrusion (MME) is associated with the progression of cartilage loss in the medial compartment. The objective of this study was to determine the intra-rater repeatability of our method of three-dimensionally analyzing MME in patients with KOA. Design: Eight knees with medial KOA were examined in participants aged between fifty and eighty years old. We created three-dimensional models of the tibia and medial meniscus using a 0.4 Tesla MRI scanner and embedded a local coordinate system into the tibia. Repeatability of measurements of the MME volume and width were tested using intraclass correlation coefficient (ICC). Results: The ICC for measuring the MME volume was 0.998 [95% confidence interval, 0.992, 1.000]. Measurement error for the MME volume was 0.5-7.0%. The ICC for measuring the MME width was 0.983 [0.924, 0.996]. Measurement error for the MME width was 0.0-11.4%. There was no correlation between the MME volume and width (r = 0.565, p = 0.145). Conclusions: This study concluded that three-dimensional volume and width measurements of the MME by a single rater using MRI images had high repeatability even in the limited image quality. The result of non-significant correlation between the MME width and volume suggests that MME width measured using a low-magnet MRI scanner not considered reliable. Further studies are needed to determine the association between the MME volume and disease progression of KOA.

Anterior Tibial Post Impingement During Stair Climbing: A Kinematic Analysis and Clinical Outcomes.

BACKGROUND: Anterior tibial post impingement during gait and stair ambulation was reported in knees with posterior-stabilized prostheses. However, the link between anterior post impingement and knee kinematics and between anterior post impingement and the clinical outcome has not been well investigated. Therefore, the purpose of this study was to assess the anterior impingement to clarify the relevant kinematics and clinical results including patient-reported outcomes. METHODS: We analyzed 40 well-functioning knees in 20 patients with a posterior-stabilized prosthesis due to osteoarthritis and who were followed up for 2 years or more. Dynamic lateral radiographs during stair-climbing activity were analyzed using a shape-matching technique, and anterior post impingement and the clinical outcome were assessed. RESULTS: Anterior impingement of the tibial post was observed in 13 knees (33%) during the latter half of the stance phase and at the beginning of the swing phase with the average implant flexion angle of -2.4°. Implant flexion was significantly smaller, while the femoral component was located more posterior in the impingement knees. The posterior tibial slope was significantly greater in the impingement group (6.7° ± 2.0°, 5.3° ± 1.9°, respectively; P = .041); however, no significant differences were demonstrated in anteroposterior laxity and patient-derived assessments. CONCLUSION: To avoid anterior post impingement, the posterior tibial slope should be made at 5° or less. Femoral notch-anterior post articulation should be designed to have good congruency in order to act as an anterior stabilizer in the case of impingement at knee extension.

Androgen Receptor Predicts First and Multiple Recurrences in Non-Muscle Invasive Urothelial Carcinoma of the Bladder.

The aim of this study is to investigate the role of androgen receptor (AR) expression on clinicopathologic characteristics, first recurrence free survival (RFS), progression free survival (PFS) and multiple recurrences in non-muscle invasive bladder cancer (NMIBC). AR expression in 40 paraffin-embedded specimens of primarily diagnosed NMIBC after transurethral resection was examined by immunohistochemistry using a monoclonal AR antibody. Associations between AR expression and clinicopathologic features and prognosis were statistically assessed. Multivariate Cox proportional hazards model was applied for evaluating predictive factors on RFS and PFS. For multiple recurrences, we used the Andersen-Gill model. AR was positive in 20/40 (50%) cases. Twenty-three patients (57.5%) had no recurrence, 10 (25.0%) had one recurrence, and 7 (17.5%) experienced more than one recurrence. AR expression and clinicopathologic features were not significantly correlated (P >0.05). Univariate analyses showed that AR expression was significantly associated with RFS and PFS (P <0.05). Via multivariate analyses, positive AR expression was significantly associated with lower risk of first recurrence (hazard ratio (HR) = 0.265; 95% confidence interval (95% CI) = 0.084-0.829; P = 0.022). Multivariate analysis of PFS was not feasible in our cohort. Using the multivariate Andersen-Gill model, positive AR expression in the primary tumor was an independent factor predicting lower risk of multiple recurrences (HR = 0.387, 95% CI = 0.161-0.927, P = 0.033). Androgen receptor expression is associated with first and multiple recurrences in NMIBC.

Optimal body mass index cut-point for predicting recurrence-free survival in patients with non-muscle-invasive urothelial carcinoma of bladder.

In Japanese patients with non-muscle-invasive urothelial carcinoma of the bladder, the impact of body mass index (BMI) on recurrence following transurethral resection of bladder tumor (TURBT) is unclear. The present study retrospectively examined data collected from 50 patients diagnosed with primary urothelial carcinoma of the bladder (pTa, pTis, and pT1) who had previously undergone TURBT surgery. Two BMI cut-off points for predicting disease recurrence were evaluated: i) A threshold generated through receiver operating characteristic (ROC) curve analysis; ii) the World Health Organization BMI index (24 kg/m2) for overweight status in Japanese populations. Univariate and multivariate analyses were applied to assess individual variables (BMI included) and the effect they had on recurrence-free survival (RFS). Median RFS and BMI values of 19.72 months (range, 3.13-72.13 months) and 23.37 kg/m2 (range, 14.72-36.84 kg/m2), respectively, were recorded. In multivariate analyses, higher continuous BMI was significantly associated with shorter RFS (P=0.019). Based on a ROC-generated BMI cut-off point (23.4 kg/m2), patients were ranked with either a high (≥23.4 kg/m2) or low (<23.4 kg/m2) BMI status. Multivariate analysis indicated that BMI values >23.4 kg/m2 were significantly associated with shorter RFS (P=0.028). Intravesical Bacillus Calmette-Guérin treatment and history of upper-tract urothelial carcinoma were also independently associated (P=0.044 and P=0.010, respectively). However, BMI values >24 kg/m2 (customary cut-off point) had no significant impact on RFS (P=0.066). Thus, a higher BMI status was revealed to be independently predictive of shorter RFS in Japanese patients undergoing TURBT for urothelial carcinoma of the bladder. A greater number of samples are required in order to determine optimal BMI cut-off points in Japanese patients and to investigate whether weight reduction intervention may improve prognosis.

Immediate effects of leg-press exercises with tibial internal rotation on individuals with medial knee osteoarthritis.

OBJECTIVE: Although patients with knee osteoarthritis (OA) demonstrate abnormal kinematics involving greater tibial external rotation during squatting, there have not been any previous studies investigating an exercise focused on correcting knee rotational kinematics. This study aimed to determine the immediate effects of exercise with tibial internal rotation (IR) on symptoms and functions in patients with knee osteoarthritis (KOA). METHODS: This study provides Level II evidence using a small randomized controlled trial. Sixty patients were allocated to either the tibial IR or neutral rotation (NR) group in this randomized controlled trial. The IR group performed a leg press activity with the tibia in maximal IR, whereas the NR group performed leg press activity with the tibia in NR. Outcome measures were (a) 10-m walk test; (b) Timed Up and Go test, (c) knee flexion angle while squatting, (d) knee pain during walking and squatting, and (e) difficulty during walking and squatting. RESULTS: Significant interaction was observed in all outcomes. The IR group exhibited significant improvement on all outcome measures, whereas the NR group exhibited significant improvements only in the 10-m walk. CONCLUSION: The IR group exhibited greater improvements than the NR group on all outcome measures. After a single session, leg press activity with the tibia in maximal IR improved the symptoms and functions measured in this study more effectively than leg press activity with the tibia in a neutral position. This suggests that correcting rotational malalignment is more important than strengthening the quadriceps for maintaining or even improving function of OA knees. (Clinical trials registration number: UMIN000021751).

Kinematic analysis of posterior-stabilized total knee arthroplasty during standing up from and sitting down on a chair.

BACKGROUND: Total knee arthroplasty is effective to regain quality of life. Standing up from and sitting down on a chair and stair stepping motion are important in daily living. We previously reported in vivo kinematics of this implant during a stepping exercise. The purpose of this analysis was to assess in vivo knee motion during standing up from and sitting down on a chair and determine the motion pattern in patients with the unique knee prosthesis. METHODS: A total of 15 patients implanted with Bi-Surface PS were assessed during standing up from and sitting down on a chair. The Bi-Surface PS knee is a posterior-cruciate substitute prosthesis with a unique ball-and-socket joint in the mid-posterior portion of the femoral and tibial components. Patients were examined during standing up from and sitting down on a chair using a two-dimensional to three-dimensional registration technique. RESULTS: During standing up from and sitting down on a chair from minimum to 30° knee flexion, anterior femoral translation was slight. From 30° knee flexion to maximum flexion, the kinematic pattern was a medial pivot and rollback. CONCLUSIONS: This study demonstrated that the knee motion kinematic patterns observed in this study were not similar to normal knee kinematics and derived from the unique design of the Bi-Surface PS.

In vivo kinematics of a unique posterior-stabilized knee implant during a stepping exercise.

BACKGROUND: Stair-stepping motion is important in daily living, similar to gait. Knee prostheses need to have even more superior performance and stability in stair-stepping motion than in gait. The purpose of this analysis was to estimate in vivo knee motion in stair stepping and determine if this unique knee prosthesis function as designed. METHODS: A total of 20 patients with Bi-Surface posterior-stabilizing (PS) implants were assessed. The Bi-Surface PS knee is a posterior-cruciate substitute prosthesis with a unique ball-and-socket joint in the mid-posterior portion of the femoral and tibial components. Patients were examined during stair-stepping motion using a 2-dimensional to 3-dimensional registration technique. RESULTS: The kinematic pattern in step up was a medial pivot, in which the level of anteroposterior translation was very small. In step down, the kinematic pattern was neither a pivot shift nor a rollback. From minimum to maximum flexion, anterior femoral translation occurred slightly. CONCLUSIONS: In this study, this unique implant had good joint stability during stair stepping. The joint's stability during stair stepping was affected by the design of the femorotibial joint rather than post/cam engagement or the ball-and-socket joint.

Reliability and validity in measurement of true humeral retroversion by a three-dimensional cylinder fitting method.

HYPOTHESIS AND BACKGROUND: Humeral retroversion is defined as the orientation of the humeral head relative to the distal humerus. Because none of the previous methods used to measure humeral retroversion strictly follow this definition, values obtained by these techniques vary and may be biased by morphologic variations of the humerus. The purpose of this study was 2-fold: to validate a method to define the axis of the distal humerus with a virtual cylinder and to establish the reliability of 3-dimensional (3D) measurement of humeral retroversion by this cylinder fitting method. METHODS: Humeral retroversion in 14 baseball players (28 humeri) was measured by the 3D cylinder fitting method. The root mean square error was calculated to compare values obtained by a single tester and by 2 different testers using the embedded coordinate system. To establish the reliability, intraclass correlation coefficient (ICC) and precision (standard error of measurement [SEM]) were calculated. RESULTS: The root mean square errors for the humeral coordinate system were <1.0 mm/1.0° for comparison of all translations/rotations obtained by a single tester and <1.0 mm/2.0° for comparison obtained by 2 different testers. Assessment of reliability and precision of the 3D measurement of retroversion yielded an intratester ICC of 0.99 (SEM, 1.0°) and intertester ICC of 0.96 (SEM, 2.8°). DISCUSSION AND CONCLUSION: The error in measurements obtained by a distal humerus cylinder fitting method was small enough not to affect retroversion measurement. The 3D measurement of retroversion by this method provides excellent intratester and intertester reliability.

Compressive force-produced CCN2 induces osteocyte apoptosis through ERK1/2 pathway.

Osteocytes produce various factors that mediate the onset of bone formation and resorption and play roles in maintaining bone homeostasis and remodeling in response to mechanical stimuli. One such factor, CCN2, is thought to play a significant role in osteocyte responses to mechanical stimuli, but its function in osteocytes is not well understood. Here, we showed that CCN2 induces apoptosis in osteocytes under compressive force loading. Compressive force increased CCN2 gene expression and production, and induced apoptosis in osteocytes. Application of exogenous CCN2 protein induced apoptosis, and a neutralizing CCN2 antibody blocked loading-induced apoptosis. We further examined how CCN2 induces loaded osteocyte apoptosis. In loaded osteocytes, extracellular signal-regulated kinase 1/2 (ERK1/2) was activated, and an ERK1/2 inhibitor blocked loading-induced apoptosis. Furthermore, application of exogenous CCN2 protein caused ERK1/2 activation, and the neutralizing CCN2 antibody inhibited loading-induced ERK1/2 activation. Therefore, this study demonstrated for the first time to our knowledge that enhanced production of CCN2 in osteocytes under compressive force loading induces apoptosis through activation of ERK1/2 pathway.

Real-time wireless compliance monitoring system using calendar-type pill organizer.

BACKGROUND: Accurate information about patients' use of medication is crucially important for medical treatment. Real-time information can prevent treatment failure resulting from medication delays or failures. OBJECTIVE: In this study, a compliance-monitoring system is developed for physicians to ascertain their patients' drug-taking behaviors at home in real time. Its operation is then evaluated. METHODS: The authors produced a device that uses wireless communication to notify a physician that drugs are taken out of a package by a patient. The device has sensors to detect the package opening. A wireless module is installed in a drug-containing calendar-type pill organizer. RESULTS: Experimental trials confirmed that a physician can monitor the kind and number of drugs removed from the package on a real-time basis. Furthermore, a practical system can be produced by measuring the distance and consumption current of the produced device, which allows wireless communication. CONCLUSIONS: This system enables a doctor to intervene immediately when any compliance lapse occurs, thereby preventing treatment failure caused by delayed response.

Compliance monitoring system using screen printing technology based on conductive ink.

We developed a compliance monitoring system that electrically detects which drug among the multiple prescribed drugs a patient has taken and the date of drug-taking by a patient to prevent the patient from missing doses and taking drugs incorrectly at home. A conductive pattern is screen printed using conductive ink (silver paste) on the surface of a calendar-type pill organizer containing medications for as long as 1 week (4 times per day × 7 days, 28 doses) to create a sensor for detecting the opening of a pill organizer. Whenever the patient opens the pill organizer and removes a dose of the drug (pill), information about which of the 28 locations is opened and the date of opening are recorded in nonvolatile memory. This system is applicable to patients who take multiple drugs, for whom recording of drug-taking behavior is reportedly difficult. Specific benefits are that the user needs no additional manipulation to use the system: the user can take the drug from the pill organizer according to usual procedures.

Assisting the diagnosis of overt hypothyroidism with pattern recognition methods, making use of a set of routine tests, and their multiple correlation with total T4.

In our previous papers we proposed a novel screening method that assists the diagnosis of patients with overt Graves' hyperthyroidism by making use of routine test data and pattern recognition methods. This method can be applied by non-specialists during physical check-ups at low cost and is expected to lead to rapid referrals for examination and treatment by thyroid specialists, that is, to improve patients' QOL. In this report, we investigate whether a similar screening method is also applicable for overt hypothyroidism. Fifty-six subjects with 12 routine test data with a known diagnosis (30 patients with overt hypothyroidism and 52 healthy female volunteers, and 26 patients with overt hypothyroidism and 48 healthy male volunteers) were used as training data. Then, test samples of patients who had also undergone the same routine tests at the Tohoku university hospital were screened by our method for overt hypothyroidism. The present examination of the screening method showed its high screening ability with the set of four parameters used (lactate dehydrogenase [LDH], total cholesterol [TC], red blood cell [RBC] and serum creatinine [S-Cr]). It was found that there was a strong multiple correlation between the set of routine test parameters and serum total thyroxine (TT4) in the patients with overt hypothyroidism, which supports the usefulness of our screening method.